Useful Mechanical Properties And Industrial Materials Details. FastTip#93
Posted: 18 Aug 2021 09:38
International Standards For Mechanical Properties and Industrial Substances
Note The factory-like conditions are intended to protect glue joints against dust and weathering of the lead. They prevent movement during curing, and ensure the same temperature and relative humidity levels as in a factory atmosphere. This document also covers glue-in rods made of treated timber. This document doesn't cover rods that are glued-in made from modified and stabilized wood that has substantial reductions in shrinkage or swelling. This document does not apply to rods that are glued-in in modified or stabilized wood with substantially reduced swelling and shrinkage properties, e.g., acetylated or heat treated, polymer impregnated wood or preservative treated timber. These joints are made for timber frames bearing loads which fall into service classes 1 or 2 as per EN 1995-1-1. They are also prone to be static or quasistatic, according to EN 1990-1-1-1 as well as EN91-1-1. The joints can be utilized for load bearing timber structures that aren't subjected to temperatures above 60 ° Celsius for prolonged periods. If the place of application for this standard can be determined and it is compatible with your existing technical base. You can contact a firm who has expertise in international criteria selection to provide advice and help you choose the appropriate standard.
Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures- Testing, requirements and repair strength verification EN 17418:2021
Effective systems require methods for evaluating them. This topic has been discussed several times. This stage is a possibility in virtually every production. EN 1718-2021 is an important standard that regulates the testing procedures and their specifications. This document details the prerequisites and procedures for testing two-component polyurethane and epoxy adhesives. These adhesives can be utilized for repairs and maintenance cracks in timber structure constructed of strength-graded lumber with rectangular cross-section, nails joined to form a structural nail and glued wood. The thickness of the glue line can be up to 8mm.
Repair cracks caused either by screws, nails or dowel attachments can be done with the adhesive. This document only addresses adhesives that comply with Clause 8 requirements. This document covers wood repair. This glue is designed for structures that are load bearing. The glue must not be subjected to temperatures exceeding 60°C within a shorter time frame according to EN95-1-1. These structures are able to be loaded either in a quasi-static or a predominant manner. For more information, please look up EN 1990-1-1 and EN 1991-1-1.
For more information about the documents available We suggest you go to the site's link. This is likely the best place to look for standards that could help enhance the efficiency of your business's systems.
Plastics- Determination of dynamic mechanical properties- Part 3: Flexural vibration- Resonance-curve method (ISO 6721-3:2021) EN ISO 6721-3:2021
Plastic is decreasing because of its negative environmental impact. EN ISO 6223:2021, however, is one of the regulations that has been created to control all activities that require the use of this material. This document outlines a procedure to measure the flexural complex modulus of homogeneous polmers with bending vibration. It makes use of resonance curves. It also provides damping properties for laminated substances which are designed to be used as an Acoustic insulation material. These properties can also be used to calculate frequency and temperature for many functions.
This standard is highly recommended in the event that your activities are in direct or indirect contact with any of these equipment or materials. It will help ensure that your system meets the requirements of global markets. This is what will keep your company at the top of your field.
It is important for an business to be able to set international guidelines
At first glance it could appear as if global standards are only necessary for local manufacturers or businesses. Globalization is becoming a frequent trend. Your company can increase its performance by planning to take advantage of international markets. We will gladly assist with selecting the appropriate international document for your business or business.
Note The factory-like conditions are intended to protect glue joints against dust and weathering of the lead. They prevent movement during curing, and ensure the same temperature and relative humidity levels as in a factory atmosphere. This document also covers glue-in rods made of treated timber. This document doesn't cover rods that are glued-in made from modified and stabilized wood that has substantial reductions in shrinkage or swelling. This document does not apply to rods that are glued-in in modified or stabilized wood with substantially reduced swelling and shrinkage properties, e.g., acetylated or heat treated, polymer impregnated wood or preservative treated timber. These joints are made for timber frames bearing loads which fall into service classes 1 or 2 as per EN 1995-1-1. They are also prone to be static or quasistatic, according to EN 1990-1-1-1 as well as EN91-1-1. The joints can be utilized for load bearing timber structures that aren't subjected to temperatures above 60 ° Celsius for prolonged periods. If the place of application for this standard can be determined and it is compatible with your existing technical base. You can contact a firm who has expertise in international criteria selection to provide advice and help you choose the appropriate standard.
Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures- Testing, requirements and repair strength verification EN 17418:2021
Effective systems require methods for evaluating them. This topic has been discussed several times. This stage is a possibility in virtually every production. EN 1718-2021 is an important standard that regulates the testing procedures and their specifications. This document details the prerequisites and procedures for testing two-component polyurethane and epoxy adhesives. These adhesives can be utilized for repairs and maintenance cracks in timber structure constructed of strength-graded lumber with rectangular cross-section, nails joined to form a structural nail and glued wood. The thickness of the glue line can be up to 8mm.
Repair cracks caused either by screws, nails or dowel attachments can be done with the adhesive. This document only addresses adhesives that comply with Clause 8 requirements. This document covers wood repair. This glue is designed for structures that are load bearing. The glue must not be subjected to temperatures exceeding 60°C within a shorter time frame according to EN95-1-1. These structures are able to be loaded either in a quasi-static or a predominant manner. For more information, please look up EN 1990-1-1 and EN 1991-1-1.
For more information about the documents available We suggest you go to the site's link. This is likely the best place to look for standards that could help enhance the efficiency of your business's systems.
Plastics- Determination of dynamic mechanical properties- Part 3: Flexural vibration- Resonance-curve method (ISO 6721-3:2021) EN ISO 6721-3:2021
Plastic is decreasing because of its negative environmental impact. EN ISO 6223:2021, however, is one of the regulations that has been created to control all activities that require the use of this material. This document outlines a procedure to measure the flexural complex modulus of homogeneous polmers with bending vibration. It makes use of resonance curves. It also provides damping properties for laminated substances which are designed to be used as an Acoustic insulation material. These properties can also be used to calculate frequency and temperature for many functions.
This standard is highly recommended in the event that your activities are in direct or indirect contact with any of these equipment or materials. It will help ensure that your system meets the requirements of global markets. This is what will keep your company at the top of your field.
It is important for an business to be able to set international guidelines
At first glance it could appear as if global standards are only necessary for local manufacturers or businesses. Globalization is becoming a frequent trend. Your company can increase its performance by planning to take advantage of international markets. We will gladly assist with selecting the appropriate international document for your business or business.
